The older V1 clocks with the 7 segment display can now get an upgrade to the new processor used in the V2 clocks.
The links for Live Results and Tracking are available.
The Results page shows that Start List at the moment.
Please remember "It’s the Ultra folks, but not as we know it."
Several aspects of the event will have to be different to keep in line with the Guidance from the Scottish Government and from Scottish Athletics.
The KitST clocks are designed to make timing orienteering and running events simple. Once configured they should be "turn on and go".
KitST Clocks are designed to give a simple to use, accurate and visible clock to time Orienteering, Running and other sports.
For information on the new Version 2 model (2020 ) continue below. For information on the older Version 1 follow this link:Version 1 Clocks
For Orienteering the clock can be configured to be a Start, Pre Start or Finish display.
- In Start mode the clock gives an audible countdown and start signal each minute.
- In Pre Start mode the time display is offset by the Pre Start interval and gives an audible signal each minute. i.e. at Start 12:00:00 the Pre Start can show 12:04:00
- In Finish mode the clock shows real time with no beeps.
For Running the clock can use Clock Time or be easily configured as a Stop Clock starting from 00:00:00. The clcok can be started , stopped and reset using the keypad.
The built in Highly Accurate Real Time Clock is set and synchronised using the configuration software via a USB connection cable. This battery backed clock maintains time when the clock display is turned off.
The clock display is powered by a 5v re-chargeable battery which gives 8+ hours of use and can then be re charged in a few hours.
The software interface communicates via the serial port and allows setting of:
- Time
- Sound On or Off
- Clock Type: Start Finish etc.
- Pre Start Offset in minutes
- Time zone
The clock is enclosed in a robust plastic case which is weather resistant but like most electronic systems is not immersion proof. The case is designed to easily fit on a loud speaker stand.